Картер маховика двигателя Cummins QSB-6,7

Flywheel Housing Structure Code: Mr 03 Opt Engine Family: B Clutch Type: Dry Starter Bore Position (deg): 92 fly housing to block mounting pattern: 8 x m12 x1.75 and 2 x M10X1.5 starter motor flange SAE type: #1 – 3 bolt 90 degree fly. Housing SAE size: 2 starter pilot bore diameter (mm): 88.9 Item Supplied: Flywheel Housing From engine centerline (mm): -234.1 from cranshaft centerline (mm): -8.0 angle to starter bore mounting hole pattern: 0 degrees Starter mounting hole thread size: M10X1.5 Starter mounting face offset(mm): 5.8 Starter Bore Center Distance (mm): 234.2 Starter Bore Angle From Horiz. Centerline (deg): -2 rear engine PTO included: No REPTO gear thickness (mm): N/A REPTO gear drive ratio: N/A Tachometer sensor mounting hole count: 1 Material: Aluminium Engine Mount Type: Pad mounting pad hole description: 6 x m12 x1.75 mounting pad top hole location (mm): 179.0 mounting pad angle: 0 degrees mounting arm hole size: N/A trunnion diameter (mm): N/A trunnion location: N/A trans mounting hole count/thread description: 12 x M10X1.5 Tachometer drive location/size: 150 degrees, 3/4-16 UNF Additional Info/features: 3/4-NPTF Drain Hole Suitable for general duty cycle with 180 kg transmission.