Поддон картера двигателя Cummins QSB-6,7
Oil Pan Engine Family: "B" Series Cylinders: 6 sump location: Front oil pan material: Stamped steel mounting type: Non-isolated pan high capacity (qt): 15 pan low capacity (qt): 13 pan front up angularity(deg): 30 pan front down angularity(deg): 45 pan side to side, angularity(deg): 40 drain size: M18 Drain Location: Botton position from front face of block (mm): 123.8 position from crank centerline (mm): Heater boss size: M22 heater boss location: Side position from front face of block (mm): 123.8 position from crank centerline (mm): 222.6 Oil Level Sensor Provision: No required block flange (mm): 299 x 678 oil pan mounting holes: 9.9mm thru holes oil pan/block mounting holes: 24, Spacing: Unequal oil pan/rear gear housing mounting holes: 4, Spacing: Unequal oil pan/front gear cover mounting holes: 4, Spacing: Unequal required dipstick calibrations: Bfob- full/low at 112 front face of block and 4 degrees: 69.0/78.5 bfob-full/low at 352 front face of block and 4 degrees: 51.7/60.9.
| № поз. | Обозначение | Наименование | Кол-во | Примечание |
| OP9315-04 | Oil Pan | |||
| 1 | 3900631 | Screw, Hex Flange Head Cap | 2 | M8 X 1.25 X 25 |
| 2 | 3902425 | Washer, Sealing | 1 | M22 |
| 3 | 3902460 | Screw, Hex Flange Head Cap | 3 | M10 X 1.50 X 25 |
| 4 | 3920400 | Screw, Hex Flange Head Cap | 32 | M8 X 1.25 X 21 |
| 5 | 3920773 | Washer, Sealing | 1 | M18 |
| 6 | 3924147 | Plug, Threaded | 1 | |
| 7 | 3924148 | Plug, Threaded | 1 | M22 X 1.50 X 14 |
| 8 | 3949562 | Gasket, Flange | 1 | |
| 9 | 3958209 | Pan, Oil | 1 | |
| 10 | 3959797 | Gasket, Oil Pan | 1 | |
| 11 | 3977666 | Tube, Lub Oil Suction | 1 |
